After the motorcycle has been running for a period of time, if the lifting mechanism cannot stop the heavy objects, the walking, amplitude change, etc. are not stopped within the specified braking stroke, and the movable joints in the braking system are stuck, the most common cause of the failure is that there is oil stain on the Motorcycle Ignitionlighter. So we should pay attention to the maintenance of motorcycle accessories and clean the Motorcycle Ignitionlighter and other accessories in time.
1. The joints of the motorcycle can be lubricated with oil, and then the oil stains can be cleaned with gasoline or the Motorcycle Ignitionlighter can be replaced, and the equipment can be effectively adjusted, and the nuts can be locked, and then the corresponding tests can be carried out.
2. Repair the brake wheel. The working surface roughness of the brake wheel cannot be lower than Ra=16 microns, HRC is not lower than 50, and the depth of 2 mm is not lower than HRC40.
3. Repair the Motorcycle Ignitionlighter. Its wear cannot exceed half of the original thickness, and the rivet should sink more than 2 mm.
4. The corresponding electromagnet stroke can be performed on the brake of the motorcycle, and the operating environment can be effectively cleaned to ensure that it can operate in a clean environment.